BPQGD - FLAMAREST 1400S COMPONENT C

  • MSDS: BPQGD
  • Manufacturer: TEXTRON SPECIALTY MATERIALS
  • Product Name: FLAMAREST 1400S COMPONENT C
  • National Stock Number: 6850-00N033331
Product Identification

Product ID:FLAMAREST 1400S COMPONENT C
MSDS Date:04/07/1992
FSC:6850
NIIN:00N033331
Kit Part:Y
MSDS Number: BPQGD

Responsible Party
TEXTRON SPECIALTY MATERIALS
2 INDUSTRIAL AVE
LOWELL, MA 01851
US

Emergency Phone: 508-452-8961

Info Phone: 508-452-8961

Preparer: PAUL F. DURKIN

Cage: 63262

Contractor
TEXTRON SPECIALTY MATERIALS, SUB OF TEXTRON INC
LOWELL, MA 01851-5107 US

Telephone: 508-452-8961

Cage: 63262

Ingredients

3.14.

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 50%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PHENOL, 2,4,6-TRIS(DIMETHYLAMINOMETHYL)-;

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: 50%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HARMFUL IF SWALLOWED, SKIN AND
EYE IRRITATION. CHRONIC:CAN CAUSE SKIN SENSITIZATION OR DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:FATIGUE, CONFUSION, DIZZINESS, LACRIMATION,
NERVOUSNESS, MUSCULAR FATIGUE, INSOMNIA, PARESTHESIA. NOTE:TOLUENE
(CAS# 108-88-3) APPEARS ON THE NAVY LISTING OF OCCUPATIONAL
REPRODUCTIVE HAZARDS. SEEK CO NSULTATION FROM APPROPRIATE HEALTH
PROFESSIONALS CONCERNING LATEST HAZARD LIST INFO & SAFE HANDLING &
EXPOS PRECS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR. GIVE ARTF RESP OR O*2 AS NECESSARY
AND GET MD. EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES, GET MD.
SKIN:FLUSH WITH WATER FOR 15 MINUTES, GET MD. INGEST:GET MD.

Fire Fighting

Flash Point Method:CC
Flash Point:40.0F,4.4C
Extinguishing Media:WATER, SPRAY, CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID.

Accidental Release

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. ABSORB
SPILL ON SAND, EARTH OR VERMICULITE. CAREFULLY SWEEP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PROTECT CONTAINER AGAINST PHYSICAL
DAMAGE. KEEP AWAY FROM HEAT, SPARKS AND FLAME. KEEP IN TIGHTLY
CLOSED CONTAINER. WASH AFTER HANDLING CONTAINER.
Other Precautions:AVOID CONTACT WITH SKIN, EYES OR CLOTHING. AVOID
BREATHING VAPORS. USE WITH ADEQUATE VENTILATION. AVOID PROLONGED OR
REPEATED CONTACT WITH SKIN.

Exposure Controls

Respiratory Protection:FOLLOW OSHA AND RESPIRATOR MANUFACTURERS
REQUIREMENTS (29 CFR 1910.134) (A) FOR RESPIRATORY PROTECTION.
RESPIRATORS MUST BE NIOSH/MSHA APPROVED .
Ventilation:MECHANICAL EXHAUST PREFERABLE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:CLEAN LONG SLEEVE SHIRT AND LONG PANTS, LAB
COAT, APRON.
Work Hygienic Practices:FOLLOW GOOD WORKER HYGIENE, WASH HANDS BEFORE
AND AFTER WORK BREAKS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:SEE ING 1
Vapor Pres:SEE ING 1
Vapor Density:SEE ING 1
Spec Gravity:0.92
Appearance and Odor:DARK LIQUID WITH BENZENE LIKE AND AMINE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HEAT, SPARKS, AND FLAMES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.